Tail lights

[Jacqui]

Hi, looking for tail lights covers and running lights for 10’ Sunline. Taillight number reads
30-91-010 or 30-91-011 SAE-AILRST-88
Any idea where I can find these? Just purchased this camper. It needs lots of work inside. I’m just starting to clean it up, etc.
I would also love to know how to clean/what to use to get lichen off of the outside. Any guidance would be much appreciated!!
Thanks so much! I look forward to this really fun project and hope to be camping in this cute little camper next summer.🤞
Jacqui/ new member🙏😊

[JohnB]

Hi, and Welcome!

I do not think Bargmen makes the square corner tail lights like you have anymore.

These may be your replacements that the newer Sunlines use.

The right side, no license plate mount
https://www.bargman.com/product/30-9...ghts-92-series

Here on Amazon
https://www.amazon.com/gp/product/B0...KIKX0DER&psc=1

The left side with license plate,
https://www.bargman.com/product/31-9...ghts-92-series..

Here on Amazon https://www.amazon.com/gp/product/B0...KIKX0DER&psc=1

If yours has the back up light feature, then they are different part numbers. Some of the older Sunlines had backup lights. I'm not sure if yours did or not. See this page and look for the part numbers https://www.bargman.com/products/tai...light-standard

Hope this helps

John

[Sunline Fan]

Welcome Jacqui! Cool that you have that vintage of Sunline, you don't see too many of them. It looks to be a '75-77.

John is right, I don't think Bargman makes that particular light anymore. While the round corner ones would work, I think they may be a little smaller than the original square ones too. Peterson makes a replacement square corner light that looks very much like the original:

https://www.amazon.com/Peterson-Manu.../dp/B003VAX4SQ

https://www.amazon.com/Peterson-Manu...0AZX5UHA&psc=1

Given that the inner part of the light has been exposed to the elements for a while, I would recommend replacing the entire light and not just using the new lenses. You may find the original backing plate of the light won't work well due to corrosion, etc.

[mainah]

Yeah I have been putting off the lens situation on my T1700 and have found that the lens are made of unobtanium but so far glue has worked. Mine has backup lights and that's nice so some one directly behind me knows I'm backing up cause they didn't do much for me. I don't believe the modern lens will fit the old fixtures.