Cleaning your Sunline?
- Thread starter sunny-SUN
- Start date
-
- Tags
- sunlineclub
Here's what Sunline recommends on their website...
What should I use to clean the outside of my trailer?
We recommend Reliable Cleaning Products. It works great for both the smooth side and aluminum sides. You can purchase it from your dealer or from our Parts Dept.
Alan
What should I use to clean the outside of my trailer?
We recommend Reliable Cleaning Products. It works great for both the smooth side and aluminum sides. You can purchase it from your dealer or from our Parts Dept.
Alan
FinallyTime
Advanced Member
- Joined
- Aug 18, 2006
- Posts
- 64
I have the Krystal Coat aluminuim siding. I use Meguires Gold Car Wash and a soft car wash brush, rinse with cold water, works like a charm, even takes off light black streaks.
kanyonkitty
Senior Member
Your Sunny has the KrystalKote finish if it has aluminum siding, so no waxing is required. I have the aluminum and I use a product called "Awesome", for a buck a bottle from the dollar store. There are instructions on the bottle to dilute it. But for stuborn black streaks, I "have" wet down the Sunny, then sprayed Awsome full strength on the streak, and used the car wash brush on it, and then just rinsed the uglies away. I also had Reliable with me that day, and sorry to say it cost lots more and did lots less.
sunnyseagull
Senior Member
cleaning
when I took the factory tour Larue suggested Dawn dish soap
when I took the factory tour Larue suggested Dawn dish soap
Almost any combination of soap (or detergent) and water will work. Certain brands of cleaner have their advocates. If you haven't already, go to the RV.net travel trailer forum and search on "trailer cleaning" and you'll be amazed at how much interest (and brand loyalty) this topic generates.
To my way of thinking, it's not the soap used but rather the technique of cleaning that's most important if you want to keep your unit's surface in good shape. One technique seems to be to apply concentrated cleaner to the RV and chemically dissolve the dirt, road gunk, and bugs away. Well, having spent a lot of money on my Sunline, I myself am not about to soak my unit's fiberglass with concentrated cleaner of any kind. The finish is tough, but it can be damaged.
Instead, I advocate using a combination of dilute cleaner (I agree that "Awesome" is a good choice) and some elbow grease. My technique goes like this: (1) Do an overall cleaning with dilute cleaner, plenty of water, and a deck brush. This gets off most dirt and leaves the stickier stuff. (2) Go over the unit again with a spray bottle of dilute cleaner and a thick towel for scrubbing. You'll get rid of the fresh road tar and most of the bugs. At the end of this step you'll only have the toughest spots of tar and most baked-on bugs remaining. (3) Go over the unit one last time with dilute spray-on cleaner and a Dobie pad (I recommend Dobie in particular. Other products may have scouring surfaces that will damage your unit's finish). Most of what's left will be located on the front (mostly bottom-half) and rear of the unit. Use the Dobie pad to lightly--and I emphasize lightly--buff the spots away. The point here is to use light physical pressure to remove the spots rather than trying to chemically dissolve them. Wash as often as needed and wax the unit (I don't know if you do this for aluminum) twice a year.
It's less work than it appears to be. Even after two dirty weeks in the wilds of Michigan's Upper Peninsula, I can completely clean my T-2499 in one morning. Unless the trailer is super-dirty, the last two steps involve walking around the unit and doing spot-cleaning.
Hope this helps.
Don
To my way of thinking, it's not the soap used but rather the technique of cleaning that's most important if you want to keep your unit's surface in good shape. One technique seems to be to apply concentrated cleaner to the RV and chemically dissolve the dirt, road gunk, and bugs away. Well, having spent a lot of money on my Sunline, I myself am not about to soak my unit's fiberglass with concentrated cleaner of any kind. The finish is tough, but it can be damaged.
Instead, I advocate using a combination of dilute cleaner (I agree that "Awesome" is a good choice) and some elbow grease. My technique goes like this: (1) Do an overall cleaning with dilute cleaner, plenty of water, and a deck brush. This gets off most dirt and leaves the stickier stuff. (2) Go over the unit again with a spray bottle of dilute cleaner and a thick towel for scrubbing. You'll get rid of the fresh road tar and most of the bugs. At the end of this step you'll only have the toughest spots of tar and most baked-on bugs remaining. (3) Go over the unit one last time with dilute spray-on cleaner and a Dobie pad (I recommend Dobie in particular. Other products may have scouring surfaces that will damage your unit's finish). Most of what's left will be located on the front (mostly bottom-half) and rear of the unit. Use the Dobie pad to lightly--and I emphasize lightly--buff the spots away. The point here is to use light physical pressure to remove the spots rather than trying to chemically dissolve them. Wash as often as needed and wax the unit (I don't know if you do this for aluminum) twice a year.
It's less work than it appears to be. Even after two dirty weeks in the wilds of Michigan's Upper Peninsula, I can completely clean my T-2499 in one morning. Unless the trailer is super-dirty, the last two steps involve walking around the unit and doing spot-cleaning.
Hope this helps.
Don
Similar threads
- johnmanna
- Sunline Community
- Replies: 4
- Views: 164
Try RV LIFE Pro Free for 7 Days
- Ad-Free experience on this RV LIFE Community.
- Plan the best RV Safe travel with RV LIFE Trip Wizard.
- Navigate with our RV Safe GPS mobile app.
- and much more...
