Elixir stove knobs

[Fred and Deb]

We are looking for knobs for our 1981 Trav'ler stove. The stem measures 9mm and the oven knob measures 10mm. Aunt ideas on where to find replacements are appreciated!
Thanks

[JohnB]

Hi,

I didn't know Elixir made stoves/ranges. I had thought Wedgewood was in the older Sunlines, but maybe not.

Elixir Industries may have spun off the stove/ranges a long time ago. I cannot find any reference to them. Even the original web site does not seem to work. I found this which which is linked from the elixirind.com but they do not mention stoves/ranges
http://elixirind.com/image/data/medi...draft%20V1.pdf

That said, you may be able to find an aftermarket knob set that would work. There are lot of the generic knobs for sale.

Here are a few places to start

https://www.amazon.com/s?k=elixir+ra...ref=nb_sb_noss

https://www.pplmotorhomes.com/parts/...-knobs_72-8083

Camco seems to make a universal kit
https://www.amazon.com/Camco-00943-R.../dp/B000KKOE66

If you strike out trying to find something, post some pics and check your dimensions or where you are measuring and we can see if we can help you hunt. Do you have calipers or just a tape measure?

A 9mm stem and a knob of 10mm, is the 10mm the hole in the knob? Even that seems loose or they have some kind of spring to take up the 1mm clearance.

Hope this helps

John

[dcardinale15]

try hard to find rv parts. phone is 800-348-7697

[Sunline Fan]

Interesting. I too thought that Wedgewood was used in all of them. I'm guessing this was probably replaced at some point.