|
|
06-11-2012, 05:54 PM
|
#21
|
Senior Member
Join Date: Apr 2011
Location: Maine
Posts: 3,357
SUN #2097
|
The gas line thing is quite vague it can not be used as a ground but maybe bonded to a ground. I'm not sure if there is a need in an RV as the tank side is non conductive. Any way you need a frame ground the piece you have is a broken ground lug it most likely rotted off. Just buy a new one and go some where else and find some #10 or 12 wire the #6 you have will be a right pain in the back side to install trust me you'll never want to look at a wire again after fighting it, fine in a big box but not in a small space. There should be a lug on the side of your converter the ground wire needs to go to that too if there is not a lug install one and bond it to your frame ground lug. Your new box should have a threaded hole all ready in it sheet metal screws are not allowed. See if you can find some bonding grease while your at the store and apply it to the frame lug the surface needs to shine really bright and stainless nuts and bolts would not hurt.
__________________
__________________
|
|
|
06-11-2012, 06:49 PM
|
#22
|
Senior Member
Join Date: Mar 2011
Location: New York
Posts: 460
SUN #1953
|
My master electrician buddy was real nervous when I was talking to him about a gas line ground today mainah. He understands the load center and converter, but thought a ground on a gas line could be a liability in some situations. I'm keeping an open mind.
I put a ground buss on the chassis rail tonight and grounded both the load center and converter. There is a ground buss in my converter that a 10 gauge line comes out of that I tied to the 6 gauge ground. I may make changes later, but for right now, it's good. And yes, the 6 gauge is not fun to play with in small spaces...
mainah, what did you mean by this? "Your new box should have a threaded hole all ready in it sheet metal screws are not allowed." I had a threaded hole for the ground buss. I used the machine screws that came with the inside busses, but drilled and tapped the chassis one for 1/4-28 and bolted it to the frame with a steel bolt. Switch that bolt for stainless ya think?
I may have some bonding grease around, but if I can't find it I'll get some tomorrow. Good idea, thanks!
Next is installing the new 30 amp line I have. That shouldn't take long. Next will be installing the 30/20 mini-breaker. I hope it comes in tomorrow. Then I can test, and hopefully wrap this wiring stuff up for now. Got POR-15 for the chassis. It needs it badly, but will also take time to do right. That comes after this wiring stuff is done.
I've got some holes to plug in that thin aluminum underneath as well. Any ideas?
Thanks again for the help,
Frank
__________________
__________________
2009 GMC Canyon with factory tow package & new fangled brake controller
2008 Subaru Outback
1983 Sunline T-1550
Image to come as soon as I figure out how to flatten a pic!
|
|
|
06-11-2012, 07:27 PM
|
#23
|
Senior Member
Join Date: Apr 2011
Location: Maine
Posts: 3,357
SUN #2097
|
OK on the frame I thought you meant the box. Stainless won't rust but at this point I don't think it's worth the effort. I just got done grounding a tower and antenna wiring nothing smaller then #2 with double 0 cadwelded point grounds and a 1/2X4X24" copper buss bar.
__________________
|
|
|
06-11-2012, 07:48 PM
|
#24
|
Senior Member
Join Date: Mar 2011
Location: New York
Posts: 460
SUN #1953
|
Wow, big stuff eh mainah? Ya gotta have fun once in a while...
Frank
__________________
2009 GMC Canyon with factory tow package & new fangled brake controller
2008 Subaru Outback
1983 Sunline T-1550
Image to come as soon as I figure out how to flatten a pic!
|
|
|
06-12-2012, 09:12 AM
|
#25
|
Senior Member
Join Date: Mar 2011
Location: New York
Posts: 460
SUN #1953
|
Plug problem
Darn! Now what?
Actually, just put this in before work this a.m. Gotta see what I can do tonight.
Frank
__________________
2009 GMC Canyon with factory tow package & new fangled brake controller
2008 Subaru Outback
1983 Sunline T-1550
Image to come as soon as I figure out how to flatten a pic!
|
|
|
06-12-2012, 11:14 AM
|
#26
|
Senior Member
Join Date: Sep 2006
Location: Maryland
Posts: 1,131
SUN #64
|
Frank:
One option to consider is a "Marine Power Inlet" this is how our 2007 came wired from the factory.
The power cord has a twist lock plug and a locking ring that twists into the receptacle (you can see the grove for the locking ring on the first picture).
One big advantage to this is no open hole for critters get in.
Mack
__________________
2004 Dodge Ram 2500 Club Cab 4x4 CTD
2007 Sunline Solaris T-276-SR: Misty Blue/Cherry
2001 Dodge Ram 1500 Reg Cab 4x4 OFF-ROAD
|
|
|
06-12-2012, 11:21 AM
|
#27
|
Senior Member
Join Date: Mar 2011
Location: New York
Posts: 460
SUN #1953
|
Boy, that is slick Mack, but I already bought a power cord with one end the 30 amp plug and the other end bare wires to attach to my load center. As it is, I question whether the 25' 30 amp cord will fit in the same space the 25' 15 amp cord did, and the suggestion you make here is probably the way to go. I wonder if I could return that cable I bought now that I ripped it out of the package...
Gee, those power inlets are pricey! Twice or 3 times what I paid for the cable. I'll need to talk with the minister of finance.
Frank
__________________
2009 GMC Canyon with factory tow package & new fangled brake controller
2008 Subaru Outback
1983 Sunline T-1550
Image to come as soon as I figure out how to flatten a pic!
|
|
|
06-12-2012, 12:21 PM
|
#28
|
Senior Member
Join Date: Sep 2006
Location: Maryland
Posts: 1,131
SUN #64
|
Frank:
Yeah, it is a bit pricely, but you can buy the ends (plug and cover) and use the cord you have.
Mack
Mack.
__________________
2004 Dodge Ram 2500 Club Cab 4x4 CTD
2007 Sunline Solaris T-276-SR: Misty Blue/Cherry
2001 Dodge Ram 1500 Reg Cab 4x4 OFF-ROAD
|
|
|
06-12-2012, 12:37 PM
|
#29
|
Senior Member
Join Date: Mar 2011
Location: New York
Posts: 460
SUN #1953
|
I'm gonna look into this a bit more Mack. I know I can buy ends. I've made a bunch of heavy duty electric extension cords over time. Thanks, and keep in touch!
Frank
__________________
2009 GMC Canyon with factory tow package & new fangled brake controller
2008 Subaru Outback
1983 Sunline T-1550
Image to come as soon as I figure out how to flatten a pic!
|
|
|
06-12-2012, 01:11 PM
|
#30
|
Senior Member
Join Date: Sep 2006
Location: Maryland
Posts: 1,131
SUN #64
|
Frank:
Good Luck with it. I know I love mine. It's a whole lot easier and faster to disconnect the cord and roll it up, then it is to stand there and try to stuff 25' of cord into that little hole!!
Plus, it's one less access point for critters!!!
Mack
__________________
2004 Dodge Ram 2500 Club Cab 4x4 CTD
2007 Sunline Solaris T-276-SR: Misty Blue/Cherry
2001 Dodge Ram 1500 Reg Cab 4x4 OFF-ROAD
|
|
|
06-12-2012, 01:16 PM
|
#31
|
Senior Member
Join Date: Mar 2011
Location: New York
Posts: 460
SUN #1953
|
Yeah, I hear ya Mack. I can find the power outlets like yours, but need the end that I can put on my cable that would screw and clamp on like yours. I'll look more tonight. It is a great idea and what I originally planned to do, it's just the $. I would only need to cut a few feet off my new cable to go from the load center to the outlet...
Running across the Hudson after work to get my 30/20 mini-breaker. Maybe on the way home I'll stop at the Boat n RV Warehouse, see what I can find. Thanks!
Frank
__________________
2009 GMC Canyon with factory tow package & new fangled brake controller
2008 Subaru Outback
1983 Sunline T-1550
Image to come as soon as I figure out how to flatten a pic!
|
|
|
06-12-2012, 03:12 PM
|
#32
|
Senior Member
Join Date: Mar 2011
Location: New York
Posts: 460
SUN #1953
|
Looks like about 120 bucks for everything I would need. I'll have a talk with the Minister of Finance when she gets home. Guy forgot to bring my 30/20 mini-breaker from the warehouse anyways. Ordered a Bragman switch weeks ago, that's still not here!
Frank
__________________
2009 GMC Canyon with factory tow package & new fangled brake controller
2008 Subaru Outback
1983 Sunline T-1550
Image to come as soon as I figure out how to flatten a pic!
|
|
|
06-12-2012, 05:15 PM
|
#33
|
Senior Member
Join Date: Mar 2011
Location: New York
Posts: 460
SUN #1953
|
Got Minister of Finance approval, ordered Marinco 30 Amp Valox Marine Power Inlet and Marinco 305CRCN.VPK Marine Electrical Connector and Boot Value Pack (30-Amp, 125-Volt, Female). Looks similar to the stuff on your Sunline Mack. Should be here via Amazon by Friday. Thanks!
Frank
__________________
2009 GMC Canyon with factory tow package & new fangled brake controller
2008 Subaru Outback
1983 Sunline T-1550
Image to come as soon as I figure out how to flatten a pic!
|
|
|
06-14-2012, 08:24 AM
|
#34
|
Senior Member
Join Date: Sep 2006
Location: Maryland
Posts: 1,131
SUN #64
|
Quote:
Looks similar to the stuff on your Sunline Mack.
|
Frank, they look similar because I copied those pictures off of Amazon!! But, that being said, they are the same items my trailer is wired with.
Mack
__________________
2004 Dodge Ram 2500 Club Cab 4x4 CTD
2007 Sunline Solaris T-276-SR: Misty Blue/Cherry
2001 Dodge Ram 1500 Reg Cab 4x4 OFF-ROAD
|
|
|
06-14-2012, 08:29 AM
|
#35
|
Senior Member
Join Date: Mar 2011
Location: New York
Posts: 460
SUN #1953
|
Well, by golly, there ya go! That stuff should be here today, or at least that's what Amazon tells me. This wiring project needs to wait on me getting the motor on our classic boat. With a sterling forecast for the weekend, I want to go boating! Too many toys Mack...
Thanks again!
Frank
__________________
2009 GMC Canyon with factory tow package & new fangled brake controller
2008 Subaru Outback
1983 Sunline T-1550
Image to come as soon as I figure out how to flatten a pic!
|
|
|
06-14-2012, 08:48 AM
|
#36
|
Senior Member
Join Date: Sep 2006
Location: Maryland
Posts: 1,131
SUN #64
|
Quote:
With a sterling forecast for the weekend, I want to go boating! Too many toys
|
At least your weekend involves toys.......I've got 26 new 12' deck boards awaiting me to install !!!!!
Have a nice weekend!!
__________________
2004 Dodge Ram 2500 Club Cab 4x4 CTD
2007 Sunline Solaris T-276-SR: Misty Blue/Cherry
2001 Dodge Ram 1500 Reg Cab 4x4 OFF-ROAD
|
|
|
06-14-2012, 08:55 AM
|
#37
|
Senior Member
Join Date: Mar 2011
Location: New York
Posts: 460
SUN #1953
|
C'mon now Mack, that can't take ya long to do. I don't expect the whole weekend will be spent playing with toys, unless you include getting a big outboard ready and then putting it on a boat, bleeding the trim & tilt system, and making sure a 50 year old motor starts! Then it's wiring the trailer with all this great new stuff I have coming. I can't wait. I was not looking forward to stuffing that new 30 amp cable in the small space the 15 amp cable hardly fit in. Also this weekend I would like to get that POR-15 I bought on the chassis. I'd rather be putting new deck boards on...
__________________
2009 GMC Canyon with factory tow package & new fangled brake controller
2008 Subaru Outback
1983 Sunline T-1550
Image to come as soon as I figure out how to flatten a pic!
|
|
|
06-14-2012, 09:32 AM
|
#38
|
Senior Member
Join Date: Sep 2006
Location: Maryland
Posts: 1,131
SUN #64
|
Quote:
I'd rather be putting new deck boards on...
|
Did I mention that they are pressure treated 2"x6"s????? And the old ones have to be removed?? It a ground level deck and they supporting structure is on 24" centers, so going to a lighter deck board isn't an option without re-doing the supports.
Quote:
I don't expect the whole weekend will be spent playing.....
|
Actually, my wife's company is treating us to a minor league baseball game Saturday evening, including a left field side pre-game picnic, carousel rides & games, and post game fireworks.
Mack
__________________
2004 Dodge Ram 2500 Club Cab 4x4 CTD
2007 Sunline Solaris T-276-SR: Misty Blue/Cherry
2001 Dodge Ram 1500 Reg Cab 4x4 OFF-ROAD
|
|
|
06-14-2012, 09:45 AM
|
#39
|
Senior Member
Join Date: Mar 2011
Location: New York
Posts: 460
SUN #1953
|
Man o man, you sure know how to have fun Mack. Why are the boards being replaced? Are they that old?!? I assume re-doing the supports just isn't an option?
We have two decks on our raised ranch - one the length of the house and 8' wide in front, then a raised deck that accesses our dining room out back. The house sits N-S, so the front deck looks west and the back deck looks east, which is perfect on a hot summer evening for a cook-out, cause we're sitting in the shade of the house. It is also great on nice mornings for me to go out and sip coffee, while the puppy plays around in our fenced back yard.
I'm not much of a ball fan, except the kind you throw for a mutt and he (or she) brings back to you. Boats, hot rods, and camping!
Enjoy your weekend...
Frank
__________________
2009 GMC Canyon with factory tow package & new fangled brake controller
2008 Subaru Outback
1983 Sunline T-1550
Image to come as soon as I figure out how to flatten a pic!
|
|
|
06-14-2012, 09:52 AM
|
#40
|
Senior Member
Join Date: Mar 2011
Location: New York
Posts: 460
SUN #1953
|
By the way, Saturday I get to travel an hour and a half down to some relatives for a graduation party for one of Gail's nieces. That's bound to be more fun than I can reasonably handle...
__________________
__________________
2009 GMC Canyon with factory tow package & new fangled brake controller
2008 Subaru Outback
1983 Sunline T-1550
Image to come as soon as I figure out how to flatten a pic!
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Sunline Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|