Gould/ITE circuit breakers?

[frank_a]

We're on a trip. Letchworth State Park for the weekend. Shake down cruise. Everything works thanks on large part to mainah's help. By the way, the outlet over our sink is on the frig circuit.

Frank

[frank_a]

Just so y'all know, this is how the load center looks now. By weekend after next, should have the 30/20 over on the left side, replacing the 15/15 that is there now. Will run 30 amp cord black wire to screw on 30 amp side, making it main power switch for trailer, then 20 will be reserved for A/C/.

I know red is not appropriate for a power jumper, but it was all the 10 gauge I had with me last weekend! It did da trick too...

Frank

[MACK C-85]

I know red is not appropriate for a power jumper

Nothing wrong with it. Code only designates green for grounds and white for neutrals..... Accepted practice is Black, Red, and Blue for three phase 120/240v and Brown, Orange, and Yellow for three phase 480v, but not required.

The important part is that it is 10 guage wire for 30 amps.

Mack

[frank_a]

Excellent! Thanks Mack, more to do...

Frank