Audoivox in 2001 Solaris 260 SR

Vicky · 08-01-2010, 04:46 PM

The radio/cd player is not working and I can't find the fuse that is supposed to be just behind the unit as reported by another person on here (in his particular unit). Additionally, the bigger, black cord coming from the unit appears to be one that you would plug in but I can't find where that might be. The radio is the only thing not working on that circuit. Can anyone help?

Gene · 08-01-2010, 08:15 PM

I have an Audiovox Voyager AWM930/AWM930W in my 2363, it may be the same radio. I went out and looked at the book for it and no mention of a fuse so I stuck my head in the compartment to the left of the radio. Here is what I found below. When I unscrew the little black thing just above the green arrow my radio went off. Unfortunately the fuse did not come out with the cap so I can't tell you the size but the end felt like a size "3AG". You may have to remove the 4 screws on the front of the radio and pull it out and tip it to get the fuse.

Hope this helps,

Gene

Vicky · 08-01-2010, 08:52 PM

At the risk of sounding melodramatic....you are my hero! I've gone to that radio numerous times in the past week, following wires, trying to find a fuse...without success. I unscrewed the cap you showed in your picture and the fuse came out with the cap. I don't know the proper terminology to use, but the little rod/filament that goes through the fuse does not look good. It is not broken in half but there are some serious "spots" on it. Since we don't have any fuses this size, I'll get a new one tomorrow and try it. Even if that's not the problem, you've allowed me to sleep tonight without imagining where that thing was located. Thanks so much for doing this and I could only hope to help others along the way.

Vicky

**JohnB** · 08-03-2010, 09:12 PM

Gene

Your pictures are outstanding!!! They are worth all the words in the world and extremely helpful to others here!!!!

From one picture poster to another. Keep up the good work!

John

Gene · 08-03-2010, 09:22 PM

Thanks for the kind words John. I have to say your pictures and details in many threads along with others by the many good people here set a high mark to aim for. Glad I can contribute a little something to the effort.

Gene