Rustproof Sewer Hose Holder

[kanyonkitty]

I did not want to put my sewer hose in the bumper, so I bought a vinyl (plastic) fence post cover from Lowes, made it the same length as the bumper, attached it with a bolt at each end into the original bumper, I chose to leave the ends open so the hose could air out. I used long "eye" bolts across the open ends to keep the hose in the tube. It works great as the post cover is large enough to accomodate the hose fittings without a fight and it won't rust, thus it won't turn your sewer hose into a "SOAKER HOSE".

[EMD_Driver]

This mod got transferred from the T-2499 to the T-320SR and then removed, when we traded up to the F-344SR. All this, without ever any pictures. When we got the T-2653, I told Kitty I was going to put it on. I finally got around to it, this afternoon! The only thing I added to Kitty's design, was some flat washers on the mounting bolts. I could see where the bolt heads were straining the vinyl.

So after 6 years, 3 months and 4 days.... Here are the pictures of the mod...