Thetford Aqua Magic IV
|
Ball valve part # 13168 replacement.
Disconnect water supply behind toilet.
1) REMOVE TOILET!
2) Turn toilet upside down
3) Remove 5 or 6 screws holding back seat section and valve assembly.
4) Unhook lever rod from valve lever arm and rinse lever arm. (DO NOT REMOVE BALL VALVE LEVER ARM hold-down and screw from valve housing)
5) Remove old ball valve assembly.
6) Slide new assembly in place.
7) Hook valve lever arm with rod.
8) Connect rod to rinse lever. Note it is held in place by spring arm.
9) Screw assembly in place.
10) Reassemble back seat area.
11) Place new flange gasket in place.
12) Reassemble toilet to gasket seal and flange.
13) Connect water supply and test. |
|
Disclaimer:
This website is not affiliated with or endorsed by Sunline RV or any of its affiliates. This is an independent, unofficial site.
All times are GMT -6. The time now is 06:27 AM.