|
08-28-2017, 05:42 PM
|
#1
|
Member
Join Date: Jul 2017
Location: Rhode Island
Posts: 31
SUN #9649
|
Sunline Parts Needed
Hello, the previous owner pulled away with the electric plugged in and tore that part of the exterior. I am looking for that entire piece. Or a lead on where I can get a new piece to replace that piece.
__________________
__________________
JJ
1982 Sunline - Sunny Side of Life
1966 WhiteStar- JJ's Cosmic Star
.... I've got the Sun, and the Star!
|
|
|
08-28-2017, 05:49 PM
|
#2
|
Senior Member
Join Date: Aug 2015
Location: Connecticut
Posts: 164
SUN #7710
|
Hi Neighbor! If you get a close up picture of the aluminum, one of the folks here can tell you what style it is and where you can buy a piece on line. I'm not sure which thread it is in but I know I saw a web page with a bunch of options. Actually, take a few pictures so we can see what you see.
Steve P from Pawcatuck
__________________
__________________
Steve P
|
|
|
08-28-2017, 08:41 PM
|
#3
|
Member
Join Date: Jul 2017
Location: Rhode Island
Posts: 31
SUN #9649
|
Thanks Neighbor!!
Here are some pics
__________________
|
|
|
08-28-2017, 09:27 PM
|
#4
|
Moderator
Join Date: Dec 2006
Location: Michigan
Posts: 6,155
SUN #123
|
You'll have a really tough time finding aluminum, and would probably have to have it custom crimped. You'd also be looking at needing to have decals replicated for it, which will also be very expensive.
I think you'd be better off getting a couple 1" wide aluminum strips, one behind and one in front of the cracks. Lather up some putty tape on both pieces and sandwich them in on both the front and back of the siding crack. Then either screw or pop rivet the pieces together, through the siding. Make sure the texture of the siding is filled with putty tape, this may mean piecing in some small pieces to level it out before putting the front piece on. This should seal the area tightly. Then just paint the aluminum strips to match the siding.
Another option, since this isn't structural at all, could be to get some JB Weld Steel Stick, and make a couple pieces to fill in the gap tightly. Push it into the cracks and smooth it out until it sets up. You may want to put masking tape around the general area around the cracks because the JB Weld can be messy- make sure to wear gloves when you use it too. Then you should be able to paint it to match later on too.
Here's your hatch. In polar white, but this can be painted to match too:
Basic Cable Hatch, Flat Sided, Polar White - RV Designer B140 - Electrical Hatches & Outlets - Camping World
And since you'll have found paint to match, you can give that hot water heater door some love too!
__________________
2007 T-286SR Cherry/Granola, #6236, original owner, current mileage: 9473.8 (as of 6/18/21)
1997 T-2653 Blue Denim, #5471
1979 12 1/2' MC, Beige & Avocado, #4639
Past Sunlines: '97 T-2653 #5089, '94 T-2251, '86 T-1550, '94 T-2363, '98 T-270SR
|
|
|
08-29-2017, 07:14 AM
|
#5
|
Member
Join Date: Jul 2017
Location: Rhode Island
Posts: 31
SUN #9649
|
[QUOTE=Sunline Fan;139305]You'll have a really tough time finding aluminum, and would probably have to have it custom crimped. You'd also be looking at needing to have decals replicated for it, which will also be very expensive.
...... I'm not worried about decals. I have a machine and I can recreate my own decals in oracle vinyl if I really need them. I want the integrity of the camper repaired.
Thank you for the link to the cap.
__________________
JJ
1982 Sunline - Sunny Side of Life
1966 WhiteStar- JJ's Cosmic Star
.... I've got the Sun, and the Star!
|
|
|
08-29-2017, 08:01 PM
|
#6
|
Moderator
Join Date: Dec 2006
Location: Michigan
Posts: 6,155
SUN #123
|
[QUOTE=jazw33;139319]
Quote:
Originally Posted by Sunline Fan
You'll have a really tough time finding aluminum, and would probably have to have it custom crimped. You'd also be looking at needing to have decals replicated for it, which will also be very expensive.
...... I'm not worried about decals. I have a machine and I can recreate my own decals in oracle vinyl if I really need them. I want the integrity of the camper repaired.
Thank you for the link to the cap.
|
If you're serious about wanting to replace that whole piece of aluminum, Tim Heintz of Heintz Designs in Florida can crimp any aluminum you want.
Heintz Designs Vintage Trailer Restorations - FOR SALE Vintage Trailers, Parts, and Services
__________________
2007 T-286SR Cherry/Granola, #6236, original owner, current mileage: 9473.8 (as of 6/18/21)
1997 T-2653 Blue Denim, #5471
1979 12 1/2' MC, Beige & Avocado, #4639
Past Sunlines: '97 T-2653 #5089, '94 T-2251, '86 T-1550, '94 T-2363, '98 T-270SR
|
|
|
09-08-2017, 06:25 AM
|
#7
|
Member
Join Date: Jul 2017
Location: Rhode Island
Posts: 31
SUN #9649
|
Thank you! I will look into that.
__________________
JJ
1982 Sunline - Sunny Side of Life
1966 WhiteStar- JJ's Cosmic Star
.... I've got the Sun, and the Star!
|
|
|
03-30-2020, 06:58 AM
|
#8
|
Junior Member
Join Date: Mar 2020
Location: Florida
Posts: 2
SUN #11824
|
need a frontcover for my window 2000 sunline.
__________________
|
|
|
03-30-2020, 10:39 PM
|
#9
|
Moderator
Join Date: Nov 2006
Location: Ohio
Posts: 12,649
SUN #89
|
Quote:
Originally Posted by mexico94
need a frontcover for my window 2000 sunline.
|
I "think" the year 2000 campers were still on Hehr windows.
Pellandent reps both Hehr and Kinro windows, Kinro was what Sunline used after they switched from Hehr.
See here. You may have to call them to get just the rock guard cover but they would be where I would start. I have bought from them in the past and had a good experience and good phone service. https://www.pellandent.com/RV-WIndow...ote-Hehr-Kinro
Let us know how you make out
John
__________________
Current Sunlines: 2004 T310SR, 2004 T1950, 2004 T2475, 2007 T2499, 2004 T317SR
Prior Sunlines: 2004 T2499 - Fern Blue
2005 Ford F350 Lariat, 6.8L V10 W/ 4.10 rear axle, CC, Short Bed, SRW. Reese HP trunnion bar hitch W/ HP DC
Google Custom Search For Sunline Owners Club
|
|
|
03-31-2020, 07:31 AM
|
#10
|
Senior Member
Join Date: Apr 2011
Location: Maine
Posts: 3,357
SUN #2097
|
Check some salvage yards lot of time they have junked campers find a pattern that matches yours cut out a patch and tuck it under the upper piece and glue it down.
__________________
|
|
|
03-31-2020, 08:14 AM
|
#11
|
Moderator
Join Date: Nov 2006
Location: Ohio
Posts: 12,649
SUN #89
|
mexico94,
Mainah's post about the junk yard is a good one and has sparked a thought I forgot to mention. The fenders are made from ABS plastic and are repairable depending on how bad they are.
I have repaired several ABS parts that are cracked in half, cracked apart in multiple places, or the screw holes are cracked out. The materials to fix several fenders only costs approx $20 to $25 and about 1.5 to 2 hrs accumulated each.
When my T310SR had a tire blow out and destroyed the fender, and I lost 4 feet of it along the highway, that large a failure was not fixable. ICON solved that problem with a new one, but they do cost much.
If repairing is something you want to try, let us know. We have a post on it but I can updated it on some recent fixes.
John
__________________
__________________
Current Sunlines: 2004 T310SR, 2004 T1950, 2004 T2475, 2007 T2499, 2004 T317SR
Prior Sunlines: 2004 T2499 - Fern Blue
2005 Ford F350 Lariat, 6.8L V10 W/ 4.10 rear axle, CC, Short Bed, SRW. Reese HP trunnion bar hitch W/ HP DC
Google Custom Search For Sunline Owners Club
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Sunline Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|