First Sunline

[TinyTraveler]

Honey and I just purchased an 86 Saturn M1650. The inside has been stripped down and someone has put up plywood covering all inside walls and ceiling.
We were wondering if we could find a floor plan from the original design.
Looks like we'll have lots to do to make it comfy..Any ideas ??
Thanks loads..!!

[Steve Collins]

Originally Posted by TinyTraveler

Honey and I just purchased an 86 Saturn M1650. The inside has been stripped down and someone has put up plywood covering all inside walls and ceiling.
We were wondering if we could find a floor plan from the original design.
Looks like we'll have lots to do to make it comfy..Any ideas ??
Thanks loads..!!

In the Files area you will find brochures for all model years of Sunline production. Download the one for 1986. Based on the size of the trailer and window and vent placement, you should be able to figure out what the original floor plan was.

The files area is found by clicking on the FILES tab at the top of every page.

[TinyTraveler]

Thanks Steve ..Got it. Are the spec measurements taken from the inside or outside? Stupid question # 1 . We are unsure of the model #.. We have only camped with a tent and we are so excited about our new camper.

[Sunline Fan]

Originally Posted by TinyTraveler

Thanks Steve ..Got it. Are the spec measurements taken from the inside or outside? Stupid question # 1 . We are unsure of the model #.. We have only camped with a tent and we are so excited about our new camper.

Measurements are very likely exterior dimensions, unless one is labeled interior height. Exterior length will always be measured tip to tip, not just the "box" of the trailer.

You can probably narrow down your original floorplan based on window/door placement, but if you can post pictures, we can help you figure it out. Some of the over 20' trailers can get tricky because there were a few different configurations with the same general window pattern, but I do have a few tricks.