M345 slide toppers

[JstWantoRide]

I recently purchased a 2003 m345 that needs some work. It is going well but I need all three slide toppers and can't find where to buy them or even what ones I need exactly. Any help would be greatly appreciated.

[EMD_Driver]

You will need to measure each slide, from flange to flange lengthwise. Write those measurements down in total number of inches. Camping world carries and installs them, but you are probably looking at about $1,400 total.

Slide toppers, would probably have help keep that slide floor from getting wet. It's a shame.

[JohnB]

Hi, Do you need just new fabric or the entire arms, roller and all hardware?

[EMD_Driver]

If memory serves, it didn't have toppers on it at all. I could be wrong though. If he already has hardware, it would be MUCH cheaper and he could replace them himself.

[krazedave]

Besides the measurement mentioned above you also need room width, outside wall to outside wall and flange width. That will determine the hardware kit needed. There is a short and a tall kit. Also check and see if the rails are already installed above the slide outs. My 06 T264SR had the rail installed from factory.

[JstWantoRide]

I think it has the hardware, the roller mechanism is there, just needs the fabric, I hope. I can post pictures soon. Thanks again for all the help.

[EMD_Driver]

Originally Posted by JstWantoRide

I think it has the hardware, the roller mechanism is there, just needs the fabric, I hope. I can post pictures soon. Thanks again for all the help.

I couldn't remember if it had the hardware, or not. They didn't give me much of a chance to inspect it. If you are interested, I would be willing to help you with replacing the floor. I can't physically be there, but I can let you know what I was planning on doing, if I got it.

I really wish we had known each other before the auction, it would have cost you a lot less money!

[JstWantoRide]

Me too. At least I found this forum now, I will need the help. Thank you!